HENGWEI
Louvered roofs built to be used in January, not just July.

Constructing Spaces, Enhancing Life

Louvered roofs built to be used in January, not just July.

Adjustable louvered pergolas, zipper-guided wind screens and enclosed courtyard pavilions — made to measure in aluminium, delivered factory direct.

0–120°
Blade adjustment
Level 12
Wind rating, zip screens
250×50
Blade profile, mm
5–9
Weeks, factory to your door

Level 12 wind rated

117–134 km/h, zip screens

0–120° motorized blades

250 × 50 mm, sealed profile

6063-T6 · 40 dB

Aluminium doors, PA-66 break

Made to measure

Factory direct since 2008

5-year structural warranty

Drawing approved before production

Sealed-blade drainage

250 × 50 mm blades with rubber seals. Rain runs blade channel → beam gutter → column → base outlet, so nothing drips at the edges.

Zipper-locked screens

Welded zip beads run in PVC side channels. The fabric stays flat and taut to level-12 wind instead of flapping out of a guide.

Named components

Sauleda Teflox fabric, Somfy or Duya motors, Siegenia door hardware — written on the drawing, not left to a house brand.

Built to your opening

Any width, any span, single bay or continuous row. Production runs 15–25 days once drawings are approved.

Shop by how you live outside

What will yours be for?

Ways to use it

Eight ways owners actually use these structures

A dinner that survives the weather

Close the louvres to 0° and rain runs into the beam gutters instead of onto the plates; open them to 120° after the front passes and the sunset comes back in. One remote, one roof.

Poolside shade that stays put

A louvered roof blocks the midday glare without giving up the open sky, while zip screens run down the exposed side — rated to level 12, a real number on a coastline, not a brochure figure.

A garden room you can heat

A courtyard pavilion is a small building, not a gazebo with walls added later: honeycomb roof, wood-veneer interior, doors that seal like a window, with optional AC and underfloor heating.

Stop the greenhouse effect

An orbital sky canopy draws a tensioned Sauleda Teflox fabric (800 g/m², M2 fire-rated) across the glass on a hidden track, and retracts when the sun moves off.

Shade a shopfront without a scaffold

A full-cassette awning bolts to the facade and disappears into an aluminium box when retracted. Several units join on one line so the shade reads as a single canopy.

A three-season room from a terrace

Bolt zip-screen channels to the pergola posts and add a lift-slide door, and an open terrace becomes a room you can heat — the door holds noise out at 40 dB.

Roof garden, no wind tunnel

Sealed louvre blades close the gaps and the same frame carries wind screens on the exposed edges, so a rooftop terrace becomes somewhere you actually sit.

Built for guests, tough enough for weather

Aluminium frames, stainless fixings, a five-year structural warranty and factory-direct parts — a damaged bracket is a two-day fix, not a six-week wait.

Engineering, not decoration

Three details that separate a ten-year structure from a two-summer mistake

Every number below is on the factory drawing — blade wall thickness, fabric weight, motor brand, drainage path. Nothing is left to a brochure render.

  1. 01

    Blades that seal, not just tilt

    250 × 50 mm aluminium blades with walls over 2.8 mm and rubber strips along every edge. Closed, the roof is watertight; open, it adjusts through 0–120°.

  2. 02

    Drainage you never see

    Water travels from blade channel to beam gutter, down inside the columns and out at the base — no downpipes on the elevation, no drip line across the patio.

  3. 03

    Fabric and motors with names

    Sauleda Teflox at 800 g/m² and 270/230 daN/5 cm, Somfy or Duya motors, Siegenia hardware. Components you can look up.

How it works

From drawing to installed structure

Made-to-measure means nothing is cut before you approve it — dimensions, drawing and price first, production second.

  1. 1

    Measure & specify

    Send opening dimensions and photos. We confirm span, blade count, fabric and mounting before anything is cut.

  2. 2

    Drawing & approval

    You receive a dimensioned drawing and a quotation. Production starts only when both are approved.

  3. 3

    Factory production

    15–25 days in our own plant: extrusion, powder coating, fabric welding and pre-assembly checks.

  4. 4

    Shipping & installation

    Crated for sea or air freight with an installation sequence and video. Local crews, or our engineers on site.

  5. 5

    After-sales

    5-year structural warranty, 8 years on fabric fading, replacement parts supplied factory direct.

Confidence built to last

Five years on the structure, eight on the fabric

The warranty covers what actually fails first: the frame and mechanism for five years, the fabric against fading for eight. Parts come from the factory that made the unit — not from a local distributor's shelf.

Read the warranty terms

Send your dimensions, get a real quotation

Tell us the opening size and how you want to use the space. We reply within 24 hours with a specification, drawing and price.